AIR TREATMENT

REFRIGERATED AIR DRYER

A refrigerated compressed air dryer is a cost effective way to dry air and avoid condensate problems in majority of compressed air applications. This method of drying is popular as it ensures compressed air drying for a quite stable Pressure Dew Points of +3 °C. cycling, non cycling, or phase change material are available from range of our dryers equipped with accurate dew point control, excellent dew point performance, smart maintenance and environmentally friendly refrigerants.

srxg

Sullair SRCG


Capacity 1 - 180 m³/min
Max/min inlet Pressure 16 barg/3 barg
Max/min inlet Temp 49°C / 4°C
Pressure Dew Point 3°C
pcm

Hankinson PCM


Capacity 3.39 - 407 m³/min
Max/min inlet Pressure 16 barg/3 barg
Max/min inlet Temp 65°C / 4°C
Pressure Dew Point 3°C
palf

Pure Air PALF


Capacity 0.6 - 65 m³/min
Max/min inlet Pressure 16 barg/3 barg
Max/min inlet Temp
Pressure Dew Point
hra

Hankinson HRA & HRB


Capacity 0.5 - 360.3 m³/min
Max/min inlet Pressure 16 barg/3 barg
Max/min inlet Temp 49°C / 4°C
Pressure Dew Point 3°C

HEATLESS DESICANT AIR DRYER

Heatless Regenerative Air Dryer are the simplest way to provide clean, dry compressed air. They are able to dry air to a pressure dew point of −40 °C. Heatless dryers use purge air to regenerate while the other tower is drying. it switches between the two desiccant chambers and cycles the system through the drying and regeneration cycles. With very few moving parts, heatless desiccant dryers are extremely reliable, require little maintenance over life time and generally have a small footprint. This purge air accounts for approximately 15% of the processed air.

spx

Sullair SPX


Capacity 3.8 - 125 m³/min
Max/min Operating Pressure 9.7 barg/4.4 barg
Max Operating Temp 49°C / 4°C
Pressure Dew Point -40°C
hea

Hankinson HEA HHL/HHE/HHS


Capacity 1.5-152.9 m³/min
Max/min Operating Pressure 9.7 barg/4.4 barg
Max Operating Temp 49°C / 4°C
Pressure Dew Point -40°C
paxw

Pure Air PAXW


Capacity 2 - 60 m³/min
Max/min Operating Pressure 10 barg/4 barg
Max/min Operating Temp 50°C / 4°C
Pressure Dew Point -40°C

HEATED DESICANT AIR DRYER

Heated Desiccant Dryers provide more consistent dew point than heatless desiccant dryers and lower dew points than refrigerated dryers.The compact heated regenerative air dryer deliver reliable drying performance down to a pressure dew point of −40 °C. Instead of injecting processed purge air into the regeneration tower, heated dryers pre-heat the purge air before it is used for regeneration. In a heated desiccant dryer, typically 10-12% of process air is used for purge as opposed to the 15% or more used in heatless. Heating the regenerating purge air also extends the dryer cycle time to several hours, preventing dewpoint spikes.

spxw

Sullair SPXW


Capacity 3.8 - 125 m³/min
Max/min Operating Pressure 10 barg/4 barg
Max/min Operating Temp 48.9°C / 4°C
Pressure Dew Point -40°C
hpd

Hankinson HPD


Capacity 8.5 - 90.6 m³/min
Max/min Operating Pressure 10.2 barg/4.4 barg
Max/min Operating Temp 48.9°C / 4°C
Pressure Dew Point -40°C
paxj

Pure Air PAXJ


Capacity 3 - 150 m³/min
Max/min Operating Pressure 10 barg/4 barg
Max/min Operating Temp 50°C / 4°C
Pressure Dew Point -40°C

BLOWER PURGE AIR DRYER

The Blower Purge desicant dryer is ideal for outdoor piping and operations applications that require an extremely low dew point down to -20°C, -40°C or -73°C . By combining the proven benefits of desiccant drying with the most advanced design, it offers a reliable system to clean and compressed air for the most critical applications. It also offers reduce energy consumption for your compressor via reducing or eliminating the compressed air loss.

Desiccant dryers adsorb moisture from the compressed air as the air passes through the desiccant. The dryers regenerate the desiccant using a blower to pass ambient air through a low watt density heater (heated air can absorb more moisture). The dual tower design allows for continuous adsorption of moisture by alternating the adsorbing and regenerating towers.

dbp

Sullair DBP


Capacity 500 - 1000 cfm
Max/min Operating Pressure 9.7 barg/4.4 barg
Max/min inlet Temp 50°C / 4°C
Pressure Dew Point -40°C
hbp

Hankinson HBP


Capacity 14.2 - 122 m³/min
Max/min Operating Pressure 9.7 barg/4.4 barg
Max/min Operating Temp 50°C / 4°C
Pressure Dew Point -40°C
paxb

Pure Air PAXB


Capacity 15 - 200 m³/min
Max/min Operating Pressure 10 barg/4 barg
Max/min Operating Temp 50°C / 4°C
Pressure Dew Point -40°C

FILTERS

System operators and maintenance personnel go to great lengths to keep air compressors clean and operating at peak efficiency, however, the environment the compressor is operating in, is often neglected. Once the air leaves the compressor, it is important to have superior downstream filters in place to ensure that the air going out to its application is as clean as it can be. we offer range of downstream filters with highest quality filtration in the industry for air contaminant (oil, water, dust) removal.

mpf

Sullair MPF/MPH


Capacity 1 - 468 m³/min
Air Quality Partikel Solid 0.01 micron
Oil 0.01 ppm

af

Hankinson AF/NGF


Capacity 1.98 - 45.3 m³/min
Air Quality Partikel Solid 0.01 micron
Oil 0.01 ppm

pag

Pure Air PAG


Capacity 1 - 468 m³/min
Air Quality Partikel Solid 0.01 micron
Oil 0.01 ppm