PT Chevron Pacific Indonesia via Tripatra - Fluor Consortium appointed us in 2006 for their WAF-118 pilot improvement project. It was a CPI Instrument Air Reliability Improvement Project for Area 1,3,8 and 9 in Duri, Riau. We installed 9 sets of skid packages, comprised of 18 units Sullair air compressor model ES 8-15 HAC. Subsequent to the success of the pilot project, PT Chevron Indonesia re-appointed us back in 2007 and 2008 to do their CPI Instrument Air Compressors for Duri Enhanced Oil Recovery project.
PROJECT ENGINEERING
Below are some of our engineering project portfolios. For more information you may send email to [email protected]
CENTRAL GATHERING STATION 10 - DURI OILFIELD
We were proud to have the first engineering packages entrusted to us in 1999-2000 by PT. IKPT as contractor for PT.Caltex Pacific Indonesia (now known as PT. Chevron Pacific Indonesia) for their 10th Central Gathering Station (CGS) for oil lifting activities in Duri, part of Riau Province of Indonesia. in this project we successfully installed 2 skid packages comprises of 4 units of Sullair oil injected air compressors model LS16-100HAC and dryer packages as Air instruments to their Oil lifting applications.
BELANAK WELLHEAD WHPA AND WHPB - SOUTH NATUNA SEA BLOCK B
In 2003-2005, we have our 1st offshore project for Conoco Philips via its contractor PT.McDermott Indonesia.
The project was to build two wellhead platforms, 38 wells, a floating storage and offloading (FSO) unit for liquefied petroleum gas (LPG), and a-60 miles 24 inch gas export pipelines and intra field pipelines off the Natuna shore (in between Thailand, Kalimantan, and Malaysia). Belanak was expected to produce of 600 bcf of natural gas and 100 million bbl of oil, condensate, and LPG. We supplied 2 sets of skid packages as Air instruments to meet requirement of Class 1 Div 2, NEMA 4X environment, comprised of 4 units Sullair oil injected air compressor model LS 20-100 HHAC and dryer packages
PETROCHINA BETARA JABUNG COMPLEX DEVELOPMENT
Betara Complex Development (BCD) Onshore and Offshore project in 2003 aimed at producing the sales gas to Singapore out of the gas fields in the Jabung Block in Jambi Province, Central Sumatra. LPG and condensate produced from gas processing and fractionation, will be shipped out through Floating Storage and Offloading (FSO) unit in offshore via pipelines. The Plant targets for 100 MMSCFD (million metric standard cubic feet per day), 22,200 BPD (barrel per day) of LPG, 27,000 BOD of Condensate. We worked with two engineering contractors, IKPT Chiyoda and Sempec Indonesia, and installed 5 sets of skid packages, comprised of 3+2 units Sullair oil free (air cooled) air compressor DS 13-200 and DA 13-125 HAC and 2 units oil injected aircompressor model LS 100-25 HAC
TUBAN AROMATIC PLANT PROJECT
in 2004 WAIJO Consortium appointed us to provide air supply for their Aromatics plant project for PT Trans Pacific Petrochemical Indotama. The plant target capacity was 700,000 tonnes per year (t/y) of ethylene, 380,000 t/y propylene, 250,000 t/y LLDPE/LHDPE, 170,000 t/y LDPE and 300,000 t/y styrene monomer. We installed four (4) FS-Elliott centrifugal air compressor and dryer packages providing oxygen needs in the chemicals production process.
CHEVRON PACIFIC INDONESIA WAF 118 IMPROVEMENT PROJECT & DURI IMPROVEMENT PROJECT
In this project, we installed 32 sets of skid packages comprised of 64 units Sullair air compressor model 1109AC making it the biggest milestone for us to date.
POROUS PRILL AMMONIUM NITRATE PLANT PROJECT
in 2009, we were appointed to supply Instrument Air packages for Project: KNI Orica Ammonium Nitrate Prill Plant, an investment of ORICA-Australia, aiming to increase supply of dynamites of more than 50% to meet Indonesian mining business requirements. We installed 3units Sullair oil injected air compressor model LS-20S-175HHWC and met the non yellow metal specification, which is suitable for nitric acid environment.
Pre 2009,production of Ammonium Nitrate only meet around 20% of mining needs.
LIBO BIOGAS PLANT
in 2010 we had our first gas compressor project in Libo, Sumatera for PT Chevron Pacific Indonesia. This project is to enable gas collection and remove flare gas waste for environmental commitment. We installed 1 unit Vapor Recovery Unit (VRU) / Gas Compressor Package, comprised of following:
- Gas Production of 0.9 MMSCFD
- Inlet / outlet pressure : 2.0 / 50.0 PSIG
- Oil flooded screw gas compressor, Gardner Denver model SSQG99C
- Coupled to Marathon 125 HP motor
- Completed with ASME rated Inlet Scrubber and Gas/Oil Separator, Oil Cooler and Instrumentation
- Electricals requirement met Class.1 Div.2 Gr.D Area
PERTAMINA RU VI BALONGAN: COMPRESSOR PANEL RETROFIT FOR RELIABILITY OF UTILITIES
PT. Pertamina RU VI Balongan appointed us do a very critical pilot project of Compressor Panel Retrofit for Reliability of Utilities of RCC (Residue Catalytic Cracker) Complex in 2010. In the project, we had to design and build dual redundant configuration of controllers and carried instruments change upgrade of the existing air compressors which had been operated since 1994 as single equipment to enable remote communication with the Central control room. The Scope was PLC-ASC Plant Air Compressor automation in a hazardous / Class 1 Div 2 environment, smart transmitters with HART protocol within Racks, Installation, startup, commissioning and training.
MEDCO E&P INDONESIA: RIMAU ENHANCED OIL RECOVERY (EOR) PROJECT PHASE-1
Medco E&P Indonesia is a subsidiary of Medco Energi Internasional, Tbk. for oil and gas activities in Indonesia. The company focuses on upstream activity, exploration, development and production of crude oil and natural gas. It was one of the first national company in Indonesia to apply EOR technology with chemical in a carbonate reservoir.
We supplied 2 units Sullair oil injected air compressor model WS 5512, 1 unit of compressor model WS 3012, 4 sets of SpxHankison dryers, and 1 set of CanGas PSA nitrogen generator CA-Z80 as package
We were a proud supplier to support this EOR project in 2010, contributing to our customer’s objective to meet its production target volume.
SEMEN TONASA COAL FIRED POWER PLANT
In 2011 we had the opportunity to be part of Tonasa Coal Fired Power Plant project in Biringkassi, Pangkep, South Sulawesi. The power plant aims to generate additional 2x 35MW of electricity to support Tonasa V plant’s operation. Together with their existing 3x25MW output, Tonasa aimed to meet and supply electricity requirement in-house and be cost efficient in their production.
For the fly ash handling and instrument air application, we supplied 3 units of Sullair oil injected air compressor model LS20-150 HHAC VSD and 2 units of model WS 3707 complete with Spx Hankison dryer set.
For the blanketing application, we supplied 2 units of Sullair oil injected air compressor model WS 2210, 2 sets of SpxHankison dryers, and 2 units of CanGas PSA nitrogen generator CA-P-60
PERUSAHAAN GAS NEGARA (PGN) LNG LAMPUNG STATION
PT Perusahaan Gas Negara Tbk (PGAS) in agreement with Hoegh LNG Ltd, Norwegia and PT Rekayasa Industri (Rekin) in 2013, were to develop Floating Storage and Regasification Unit (FSRU) in Labuhan Maringgai, Lampung. The project is aimed to meet electricity needs for commercial, residential and industries in Lampung and West of Java areas. We supplied compressor air package for their instrument air application need.
PT. PLN (Persero): PLTU 2 x 25 MW Anggrek, Gorontalo
Petrotec Air Power was awarded to provide Plant Air and Instrument Air Compressor Package for the Anggrek Electric Steam Power Plant (Indonesian: PLTU - Pembangkit Listrik Tenaga Uap) with a capacity of 2 x 25 MW located in Llangata Village, Anggrek District, North Gorontalo Regency, Gorontalo Province. This power plant was built by PT Rekadaya Elektrika (PTRE) in 2019, an Engineering, Procurement and Construction (EPC) contractor specialising in Electricity provision, which is also a subsidiary of PT PJB and PT PLN (Persero) Group.
It was an honour that we can be part of the national strategic project, which brings positive impact to the general community by raising the electrification ratio in Gorontalo Province by more than 99% (National ratio average is at 98.93%). We delivered our complete packages to site on schedule within the tight project timeframe.
Pertamina Drilling Service Indonesia: Portable Air Compressor and Rattling Tools
Having dependable equipment to support service works in drilling business is a must. On site, small workshop requires tough portable compressor for maintenance works.
We supported PT. Pertamina Drilling Service Indonesia by supplying our proven portable compressor Sullair 185DPQ, a legendary model smade in USA that is known for its durability and reliability as well as other mandatory tools for rattling and pipe drilling service that meets the specification and compliance.
Pertamina EP Asset 3: Akasia Bagus Development Project
PT Pertamina EP succeeded in increasing the production of the Akasia Bagus (ABG)-008 well from 578 Barrels of Oil Per Day (BOPD) to 1,580 BOPD. The increase was the result of the well intervention program carried out in early 2020. Site location is in Jatimunggul Village, Indramayu, West Java.
We were pleased to support this project by supplying one package of Instrument Air Compressor for the related production facility. As a matter of fact, Pertamina EP had purchased the same package from us back in 2016 for their other site at Paku Gajah, South Sumatera. The repeat order has proven suitability and effectiveness of the package for the program.
